FISHER DVC6010HC Locator/single action

Fisher dvc6000 series digital valve controller

It can be used for single acting or double acting actuators.

Available for configuration

#Dvc6010: for straight through control valve

#Dvc6020: for rotary and long stroke straight through control valves

#Dvc6030: for longitudinal rotary control valve

#Dvc6000 series digital valve controller can be installed on rotary and sliding rod actuators of other manufacturers

Input signal

#Analog input signal: 4-20 mA DC, standard; split range control can also provide analog control, which is required to be obtained at the instrument terminal

The small voltage of Zui must be 10.5 V DC; for HART communication, the small voltage of Zui is 11 V DC

#Zui small control current: 4.0ma

#Zui low current: 3.5ma

#Zui high voltage: 30 V DC

#Over current protection: the input line limits the current,. To prevent internal damage

#Reverse polarity protection: reverse loop current will not cause instrument damage

#Instrument power supply: 11-30 V DC at about 8 Ma

output signal

#For the pneumatic signal required by the actuator, Zui can reach up to 95% of the air source pressure

#Zui small range: 0.4 bar (6 psi)

#Zui wide range: 9.5bar (140 pisg)

#Action mode: ■ double action ■ single action positive action ■ single action reaction

Air pressure

#Recommended value: 0.3bar (5psig) higher than Zui required by actuator

#Zui maximum value: 10.3 bar (150 psi) or actuator Zui maximum pressure rating, whichever is lower

Large output capacity of Zui

#At 1.4 bar (20 psi) supply pressure: 10.7 standard m3 / HR (400 scfh)

#33.2 standard m3 / HR (1240 scfh) at 5.5bar (80 psi)

connect

#Air supply pressure: 1 / 4 "NPT female thread and integrated mounting plate for mounting 67cfr pressure regulator

#Pipeline: 3 / 8 "metal pipe is recommended

#Vent (remote evacuation): 1 / 4 "NPT female

#Electrical: 1 / 2 "NPT conduit female thread, M20 adapter optional

Stem stroke

#Dvc6010: Zui big 0-102mm (4 inches) Zui small 0-9.5mm (3 / 8 inches)

#Dvc6020: Zui 0-606mm (23-7 / 8 in)

Rotation angle (dvc6020 and dvc6030)

#Zui 0-50 degrees smaller

#Zui big 0-90 degrees